Products: Nanoflex® SG 10

Nanoflex® SG 10

This coating was designed so that sand-blasted surfaces would achieve less contact with dirt particles.

The hydro- and oleophobic effect cause the particles of contamination such as greasy, oily materials, lime and materials from environmental pollution to adhere less to the substrates or can be easily removed from the coating, i.e. without applying abrasive agents.

Contamination, as long as it is not removed, is also less visible on the surfaces (anti-fingerprint).

Nanoflex® products are extremely resistant because of the anorganic network. A formulation can be respectively adapted to the various substrates enabling the same optimised protective functionality.

Application information

Nanoflex® SG 10 is ready-to-use and can be applied directly to the surface, creating a few nanometer thin, very chemically and mechanically resistant layers of coating.

Nanoflex® SG 10 is suitable for sand-blasted silica-based surfaces because of the formulation. It can therefore be utilised advantageously as a contamination-resistant, UV-stable coating for sand-blasted glass surfaces.